10007 (CIP) - Fault during initialization of EDIABAS with K+DCAN cable on ISTAP

10007 (CIP) - Fault during initialization of EDIABAS with K+DCAN cable on ISTAP

Problem:  K+DCAN cable works with ISTAD but got an error with ISTAP (10007 (CIP) - Fault during initialization of EDIABAS)

A fault occurred on execution of the measure.







Solution:  Shutdown ISTAP. Open up your Network Connections window and look for Microsoft KM-TEST Loopback Connection.


 

Set up the IPv4 as follows:


 




Disable and Enable the Microsoft KM-TEST Loopback Connection. Launch ISTAP  > K+DCAN Emulator and start a new session.


    • Related Articles

    • 10007 (CIP) - Error during initialisation of EDIABAS

      Can't get connected. When starting a new session it finds the car, I get an error. The error says: An error occurred on execution f the measure. 94201 Technical service initialisation failed 10007 (CIP) - Error during initialisation of EDIABAS 94020 ...

    • ISTAD and ISTAP Capabilities/Features

             The ISTAD will cover the faults reading, diagnostics, battery registration and calibration tasks for all E, F, G and i series.  The ISTAD PRO will cover BMW group F & G  series approved coding and programming tasks.        The ISTAP will cover ...

    • ISTAP Issue: Fault when initializing a software component: No Service Package (CoAPI) - Directory could not be opened

      Fault when initializing a software component: No Service Package (CoAPI) - Directory could not be opened Error Codes: 94202 & 3051 CoAPI This could happen when attempting to code a task on BMW. We need to empty (not delete) the FSW_PSW.MAN trace ...

    • ISTAP won’t start

      Suggest fix:    Right click ? properties ? compatibility ? check the box next to Run this program as an administrator ? OK -Make sure .NET framework 4.5.2 or newer is installed, see below: -Make sure Microsoft Visual C + + redistribute is installed, ...

    • ISTAP CASTOR Error 94201, 63014, 55054 and 94201 - Fault when executing a PSdZ function

      This error may be caused by one or all of the following:   1-Your windows firewall is blocking the PSDz ports to communicate with your BMW, suggested fix is to turn OFF your windows firewall or any Antivirus client. 2-The ZGW got some memory stored ...